Mounting other engines on Miniplane frame

How to assemble the MINIPLANE FRAME with a non TOP80 engine

the frames are specially made for each engine, normally the cage is the same size of standard miniplane, but engine mounting and tank position are different.

POLINI 200 AND 130


1- safety belt
2- modification on the rubber suspension plate adding our 5 mm plate cut the original one put 3 5mm bolts
3- rotate the starter
4- put a pulley on the frame
5- Polini 130 needs the 3cm propeller spacer

MINARI

1 - throttle		remove the original A screw, drill 6 mm
2 - manual start
3 - side harness belt link	NO	YES belt must stay far from the net hook and rivet when charged, better stay over the hook
the torque is right side, the anti torque setting is : the right hang point ahead of the left one REMIND IT ON THE FIRST FLIGHTS

< Prec.		Succ. >

Ultimo aggiornamento (Venerdì 16 Gennaio 2015 11:38)